Course Overview
Interns turn their Track 1 breadboard circuit into a custom PCB with connected firmware, so the prototype's hardware core is permanent, compact and cloud-connected. PCB fabrication and shipping can take several weeks, so boards should be ordered by Session 9 or earlier, and interns keep a perfboard or breadboard build as a fallback. Tools: KiCad or EasyEDA, ESP32 with Arduino IDE or PlatformIO, MQTT, ThingsBoard or Adafruit IO, multimeter, soldering station. The course runs for 4 weeks (12 sessions), with the last session used to showcase and evaluate your deliverable.
Course Curriculum & Modules
Course Deliverable
Custom PCB and Connected Firmware: hardware requirements and BOM, schematic, PCB layout and Gerber files, an assembled and working board (or a documented perfboard fallback), firmware on GitHub, a cloud dashboard showing live data, and a bring-up test report.
Electrical Engineering Department Pathway
Electrical Engineering focuses on fundamental electronics, circuit schematics, custom multi-layer PCB design (KiCad), embedded microcontrollers (ESP32/STM32), hardware safety/QA compliance testing, and global component sourcing.
Computer & Hardware Requirements
Key Learning Outcomes & Benefits
- ✓Write a hardware specification, power budget and BOM for your prototype.
- ✓Program ESP32 firmware with low-power loops, I2C/SPI sensors and MQTT connectivity.
- ✓Capture a schematic, lay out a PCB in KiCad or EasyEDA and export Gerber files.
- ✓Assemble, bring up and debug the board and show live data on a cloud dashboard.
